• +86-400-833-5056
  • West side of the 3rd floor of Factory Building #7, Wuyi Science and Technology City Incubation Zone, No. 316 Wujiang Avenue, Baiyang Street, Wuyi County, Jinhua City, Zhejiang Province

FTTD (R) Dedicated Optical Ceiling AP

Model:FTTRJD-P1
Size:∅200mm
FTTRJD-P1 is a Wi-Fi access point that can provide services for indoor high-density environments such as corporate offices, bars, and cafes. It supports 160MHz bandwidth, and its speed is nearly 3 times higher than that of Wi-Fi5, and twice that of ordinary Wi-Fi6 APs. The high-performance dual-core processor comprehensively improves the network load capacity, forwards data faster, and runs more stably for a long time. WiFi6 uses OFDMA (orthogonal frequency division multiple access) technology, allowing different users to share the same channel, allowing more devices to access, with shorter response time and lower latency. It supports the new generation of WPA3 wireless encryption protocol, and even simple passwords cannot be cracked, greatly improving the security of Wi-Fi. High-efficiency components and excellent hardware design ensure that the 11ax dual-band Gigabit AP can also use standard 802.3af power supply, making installation and deployment more convenient: it supports the management of controller hardware devices, unified configuration and management, automatic configuration distribution, and easier project management.

Device Information

Device information and status Software version

WAN port settings

Networking Protocol:DHCP,STATIC,PPPOE

TCP/IP protocol support: IPV4, IPV6

WAN load balancing (optional if the hardware supports multiple WANs)

Route Management: Static Routes

AP Control Parameters

AP mode: Thin AP and Fat AP mode

Basic parameters: SSID, channel, mode, bandwidth, password

Extended parameters: power, maximum number of connections, roaming interval value

Other

Setup wizard, IP bandwidth control (QOS), DDNS, VPN penetration, network diagnostic tools

Hardware specifications

CPU

MT7981BA+7976CN CPU双核1.3GHz

Storage

Flash:128MB    DDR: 256MB

Wired Standards

IEEE802.3,IEEE802.3u,IEEE802.3ab

Ethernet interface

1 uplink 2.5Gbps fiber port, 1 10/100/1000Mbps adaptive WAN/LAN electrical port

antenna

Built-in 2.4G*2; 5.8G*3

Button

Reset Button *1

Power supply

DC input 12V

Indicator Lights

Power SYS/optical port/network port/2.4G/5G indicator light*1

Software Specifications

MESH Networking

support

Micro AC function

Support (When there is no AC in the network, the AP can be set as a micro AC. By logging into any AP, you can view and manage all APs in the network)

Number of SSIDs

4(2.4GHz) +4 (5GHz)

Wireless encryption

Support encryption/non-encryption/hiding

User Isolation

Terminal Isolation

Wireless MAC address filtering

Support blacklist and whitelist

VLAN Settings

support

Transmit power setting

support

Bandwidth Settings

support

Channel Settings

Support (support automatic optimization of the best channel)

Wireless client number limit

support

Device Management

Chinese and English WEB management

System log

support

Reset

support

Backup Configuration

support

Import Configuration

support

Software Upgrade

support

Network Diagnostics

support

Wireless specifications

Wireless Standards

 IEEE 802.11b/g/n/a/ac/ax

Wireless rate

2.4G:574Mbps、5G:2402Mbps

Wireless frequency band

 2.4GHz&5.8GHz

Wireless encryption method

l WPA-PSK,WPA2-PSK,WPA-PSK/WPA2-PSK

Wireless specifications

Application Environment

Working temperature: -10°℃~55°C

Working humidity: 10%~90% RH non-condensing

Storage temperature: -40°C~80°C

Storage humidity: 5%~90% RH non-condensing

×

Contact Us

captcha